SAIL DRAFT STRIPES

edmorales · Post by **edmorales** » 16 Oct 2004, 08:13

is there a rule on draft stripes orientation, i.e. should it be parallel to the panels or to the foot of the sail?
ed

Dick Carver · Post by **Dick Carver** » 16 Oct 2004, 20:49

HI ED.
After a quick review of the rules, it appears that only the number and width of draft stripes is regulated. 3 on the main, 2 on the jib, maximum of 30 mm wide. Can't find anything about their orientation.

edmorales · Post by **edmorales** » 17 Oct 2004, 06:43

mr. carver,
thanks for the info.i've inked the stripes parallel with the foot of the sails.only problem was i inked 1 too many on the jib.time to get the cotton balls and acetone
regards,
ed morales